Product ID:H 953 HARDENER
MSDS Date:08/07/1986
FSC:8040
NIIN:00F040800
Kit Part:Y
MSDS Number: BXMKT

Emergency Phone: 800-888-8372/914-347-4700

Info Phone: 800-888-8372/914-347-4700

Cage: EO945

Telephone: 800-888-8372

Cage: 07566

N,N-DIMETHYLDIPROPYLTRIAMINE *95-2*

CAS: 10563-29-8

POLYAMIDE OF C18 FATTY ACID PRIMERS & TETA; POLYAMIDE RESIN

CAS: 68410-23-1

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: CORROSIVE, CAUSES BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS, IRRITATION.
Medical Cond Aggravated by Exposure:SKIN & EYES CONDITIONS.

First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN:
IMMEDIATELY FLUSH W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE
PLENTY OF WATER TO DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE
TO FRESH AIR. GIV E CPR/OXYGEN IF NEEDED. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>248F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.

Spill Release Procedures:REMOVE BY ABSORBING IN ABSORBENT MATERIAL.

Handling and Storage Precautions:CORROSIVE. NUISANCE DUST MAY BE
GENERATED WHEN SANDING/SAWING CURED MATERIAL. KEEP CONTAINER
CLOSED. USE W/ADEQUATE VENTILATION.
Other Precautions:DON'T GET IN EYES, ON SKIN/CLOTHING. AVOID BREATHING
VAPOR/MIST.

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL & LOCAL EXHAUST IAW/ACGIH
RECOMMENDATIONS.
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Spec Gravity:0.9-1
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR AMBER LIQUID W/AMMONIACAL ODOR
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS & BASES.
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.